These instructions will allow you to set up your Star MC series printer as a network-connected printer on your Mac. If you want to set your printer up to print via USB/direct cable, use these instructions.
Installation Instructions
- Setup printer, power on, and load paper.
- Go to Star Support Website , select "CUPS Driver for macOS" and download the FULL version.
- Install the drivers as shown in this video.
- Plug the printer using USB
- Setup the printer as default by accessing Apple Menu->System Preferences->Printers & Scanners and setting "Default printer" drop down list to "Star MCP20"
- Connect the printer to your router using LAN (Ethernet) connector and wait 2 minutes for printer to join network.
Self Print Test
- Print Self-printing test from the printer by holding Feed button and pressing Power button. Hold the Feed button until the Self-printing test starts, it may take a few seconds.
- On the Self-printing test, you will find the printer's IP Address at the bottom of the second receipt under "Current IP Parameters Status" -> IP Address:
- Go in your browser and type this IP address
- Log in using username root and password public (you will be required to create new root password. Be sure to securely store)
- You can assign a static IP Address to your printer or leave it as dynamic using the IP Parameters menu.
- After setting new Password, click Save in left bar, and then click Save->Configuration printing->restart device, and then close browser tab.
- Set up a SSL Certificate on the printer
- Go back to SSL/TSL/Create self-signed certificate by typing the Printer IP address into your browser, logging in, and going into menu SSL/TLS > Create Self-signed Certificate
- Click download at bottom of screenFind download and click to Install the certificate into KeyChain.
- Find certificate in keychain by searching by the printer IP address, double click, expand "Trust" menu and choose "When using this certificate" "Always Trust". Close window. https://youtu.be/AFfd6D5dZGQ
Connecting Printer to CUR8
- Restart your browser to make sure the changes are effective
- Login to your CUR8 account.
- Go to Org Menu, choose Preferences/Settings, then Equipment, and select Star Printers.
- Choose the "Add A New Star Printer" button.
- Name the printer and label the printer with the same name.
- Enter the Printer IP address from step 7, and include https:// before your printer IP address.
- Save the new Printer. You can select "Make Default."
- You can now Print using the Star Print buttons for tickets, coupons, and flex passes.
- To print, you need to leave your printer connected to your network via ethernet cable, but you no longer need USB connected.